Difference between revisions of "Platform compatibility"

From GNUstepWiki
Jump to navigation Jump to search
m (Clean-up, added DragonFly, PicoBSD)
 
(56 intermediate revisions by 14 users not shown)
Line 1: Line 1:
'''Note''': Anyone know how to convert [http://www.gnustep.org/resources/documentation/User/GNUstep/gnustep-howto_toc.html Platform Compatibility HowTO]source into wiki language, so we can work on others' effort?
+
{{stub}}
  
Following are procedures for installing GNUstep on different Operating Systems.<br>
+
Following are procedures for installing GNUstep on different Operating Systems.
 +
* You may also want to take a look at the [[dependencies]].
  
  
 +
= BSD-based systems =
 +
To keep this list as brief as possible, information about these systems can [[Platform:BSD|be found here]].
  
=== AIX ===
 
''To be provided.''
 
  
 +
= HP/UX  =
 +
* GNUstep-core-1.0, please see http://en.wikibooks.org/wiki/CPAM_with_TWW/References_Manual#GNUstep_and_CPAM. look for the gnustep-core-1.0.sb and gnustep-core-1.0.pb file for building and packaging information.
  
  
=== BSD ===
+
= Linux-based systems =
 +
To keep this list as brief as possible, information about these systems can [[Platform:Linux|be found here]].
  
==== Darwin ====
 
''To be provided.''
 
  
===== Intel =====
+
= Solaris =
''To be provided.''
+
Take a look at the required and recommended [[dependencies]]. Most of these can be found at [http://www.blastwave.org/ BlastWave] (which I personally recommend) or [http://www.sunfreeware.com/ Sun Freeware].
 +
The notable exception are [http://www.haible.de/bruno/packages-ffcall.html ffcall]/[http://sources.redhat.com/libffi/ libffi], [http://www.apple.com/macosx/features/bonjour/ Bonjour] and [http://www.portaudio.com/ portaudio] (as of 2008-05-23).
  
===== PowerPC =====
+
If you plan on compiling those from source, make sure to enable the creation of SHARED libraries. ''Bonjour'' and ''ffcall'' compile right out of the box. For ''portaudio'' to compile, you will need to grab a daily-snapshot and you need to install [http://www.blastwave.org/packages.php/osndsys Open Sound System headers].
''To be provided.''
 
  
==== DragonFly ====
+
Then, if you follow the installation instructions for GNUstep, you should not run into any problems.
[http://www.dragonflybsd.org/main/ DragonFly] is an operating system and environment designed to be the logical continuation of the FreeBSD-4.x OS series.
 
  
==== FreeBSD ====
+
=== Intel ===
You can install GNUstep via ''/usr/ports/devel/gnustep''. However, not all required dependancies are installed.
 
  
If you install the following in advance, you should be fine:
+
''Intentionally left blank''.
* wmaker
 
* libxml2
 
* libxslt
 
* libgmp4
 
* libart_lgpl2
 
* libaudiofile
 
* ffcall
 
* glitz
 
You may also want to install ''/usr/ports/net/mDNSResponder''.
 
  
'''Note''':
+
=== Sparc ===
There is a bug in libkvm that '''requires''' a mounted ''/proc''. Until this bug is fixed, make sure you have an entry for ''/proc'' in your ''/etc/fstab'':
 
  
<pre>
+
* http://www.linuks.mine.nu/gnustep/solaris is one of package sources to create Solaris packages for GNUstep.
proc                    /proc          procfs  rw              0       0
+
* GNUstep-core-1.0, please see http://en.wikibooks.org/wiki/CPAM_with_TWW#GNUstep_and_TWW_HPMS. look for the gnustep-core-1.0.sb and gnustep-core-1.0.pb file for building and packaging information.
</pre>
 
  
References:
+
=== GNUstep Solaris 10 U2 vmware appliance ===
[http://www.freebsd.org/cgi/ports.cgi?query=gnustep&stype=all FreeBSD GNUstep ports],
 
[http://www.freshports.org/search.php?query=gnustep&search=go&num=10&stype=name&method=match&deleted=excludedeleted&start=1&casesensitivity=caseinsensitive Freshports GNUstep]
 
  
==== Mac OS X ====
+
* [http://developers.sun.com/solaris/downloads/solaris_apps/index.jsp Download sol u2 image], you need to have a Sun site account.
''To be provided.''
+
* You can run this image in VMware server or VMware player 1.0.3.
 +
* Install Sun Studio 11 with latest patches.
 +
* Objective Compiler
 +
** compile your own
 +
** get it from [http://www.blastwave.org/ BlastWave] using pkg-get.
 +
* download all the GNUstep tar balls and follow build instruction.
  
==== NetBSD ====
 
Building GNUstep from source is fairly straight-forward for NetBSD 1.6 and 2.0: it is suggested however to upgrade to 2.0 if possible. NetBSD/i386 has no known problems right now, however there are reports of crashout problems for gdomap on NetBSD/sparc which may be related to ffi/ffcall issues.
 
  
In general, it's easier to install dependency packages from pkgsrc rather than downloading the sources and tweaking them to build and install.
+
= OpenSolaris =
  
'''Prerequisites'''
+
This will be an add-on packages to OpenSolaris distributions using TWW tools to create SPARC/Intel packages in SVR4 formats. "pkg-inst gnustep-user-1.0 gnustep-developer-1.0 gnustep-apps-1.0" will install GNUstep user,developer and GNUstep native applications. pkg-rm will perform the reverse of installation.
  
It is assumed that you've got a basic X-windows configuration sorted out if you are intending to use the GNUstep GUI. Right now the WindowMaker window manager is recommended.
+
It will have a nice name like GNUstep O.S. (OpenSolaris).
  
To get the dependency packages installed, cd to your pkgsrc tree and cd to the right package directories, on my system:
 
  
  cd /usr/pkgsrc
+
= Darwin =
 +
Two issues differentiate Darwin from its FreeBSD cousin.
 +
# Darwin uses the Apple [[Objective-C runtime]], not the GNU version
 +
# Darwin uses the Apple version of GCC, not the GNU version
  
then go to the package you wish to install, for example:
+
See [[Platform:BSD#Darwin]].
  
  cd devel/gmake
+
= Windows =
  
and issue the command:
+
There are many Unix Environment solutions for windows. Currently GNUstep is using [http://www.mingw.org/ MingW] as its UNIX environment foundation for Windows.
  
  make install
+
=== MingW ===
  
This command will download source code and even dependencies on dependencies and compile and install them. Move back to the pkgsrc directory and do this again until all the packages are installed.
+
See [[Installation on Windows]] for details on MingW setup. Also look at precompiled binary installer, available from [ftp://ftp.gnustep.org/pub/gnustep/binaries/windows/ GNUstep's ftp site].
  
The dependency packages are:
 
  
* devel/gmake
+
= Others =
* wm/windowmaker
+
To keep this list as brief as possible, information about these systems can [[Platform:Other|be found here]].
* graphics/jpeg
 
* graphics/png
 
* graphics/tiff
 
* devel/ffcall OR devel/libffi
 
* textproc/libxml2
 
* devel/pth (only for NetBSD 1.6)
 
  
'''Build instructions'''
 
  
''To be provided.''
+
[[Category:Development]]
 
 
==== OpenBSD ====
 
''To be provided.''
 
 
 
==== PicoBSD ====
 
[http://people.freebsd.org/~picobsd/picobsd.html PicoBSD] is a one floppy version of FreeBSD 3.0-current.
 
 
 
 
 
 
 
=== HP/UX  ===
 
''To be provided.''
 
 
 
 
 
 
 
=== Irix ===
 
''To be provided.''
 
 
 
 
 
 
 
=== Linux ===
 
 
 
==== Debian ====
 
Since Debian "Sarge" you can just say
 
 
 
apt-get install x-window-system-core wmaker gnustep gnustep-devel gnustep-games
 
 
 
to get GNUstep, X11 and Window Maker installed.
 
 
 
But what happen if you are on Debian stable (3.0) release ?
 
 
 
Here is an answer from gnustep irc channel:
 
<pre>
 
<fsmunoz> change every occurence of "stable" for "testing"
 
<fsmunoz> remove the security.debian.org line
 
<fsmunoz> do apt-get update
 
<fsmunoz> apt-get dist-upgrade
 
<fsmunoz> repeat  this last one until nothing gets installed or removed.
 
<fsmunoz> the, replace "testing" with "unstable"
 
<fsmunoz> then, apt-get update
 
<fsmunoz> apt-get dist-upgrade
 
<fsmunoz> repeat, repeat.
 
<fsmunoz> done
 
</pre>
 
 
 
The above was a general guide to upgrade from Debian stable to unstable, not exactly the best way to install GNUstep packages. If one doesn't want to upgrade it is possible to simply add the unstable apt lines to the sources.list and specify the distribution when installing the packages, e.g.
 
<pre>
 
# apt-get install -t unstable gnumail.app
 
</pre>
 
 
 
This will probably upgrade some other packages to satisfy dependencies, but will have a much small impact on the system since only the packages on which GNUstep depends will be upgraded.
 
 
 
Yet another way is to add tarzeau's repository; he packages a huge ammount of GNUstep packages. Just add this to your sources.list:
 
<pre>
 
deb http://www.linuks.mine.nu/i_debian/ ./ 
 
deb-src http://www.linuks.mine.nu/i_debian/ ./
 
</pre>
 
 
 
This repository contains packages made in unstable, so it's possible that the dependencies only are satisfied in unstable systems.
 
 
 
==== RedHat ====
 
''To be provided.''
 
 
 
===== Advance Server 3.0 =====
 
''To be provided.''
 
 
 
===== FC 3 =====
 
''To be provided.''
 
 
 
==== Slackware ====
 
''To be provided.''
 
 
 
==== SuSE ====
 
''To be provided.''
 
 
 
 
 
 
 
=== Solaris ===
 
http://www.linuks.mine.nu/gnustep/solaris is one package sources to create solaris packages for GNUstep.
 
 
 
==== Intel ====
 
''To be provided.''
 
 
 
==== Sparc ====
 
''To be provided.''
 
 
 
 
 
 
 
=== Windows ===
 
 
 
==== Cygwin ====
 
''To be provided.''
 
 
 
==== MingW ====
 
''To be provided.''
 
 
 
==== SFU ====
 
Microsfot's Service For Unix.
 
 
 
 
 
 
 
=== Others ===
 
 
 
==== LiveCD for Intel ====
 
Current version is 0.9.4.2
 
 
 
Find the instructions to install and the CD itself [http://livecd.gnustep.org/ here]
 
 
 
==== Linksys NSLU2 ====
 
* First thing need to happen is to gnerate a gcc cross compiler with objc enabled.
 
Current nslu2 supported gcc only has c and c++ enabled when building the crosstool-native package.
 
* check out unslung source using follow command.
 
 
 
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/nslu co unslung
 
 
 
* add in objc as language need to be enabled.
 
 
 
perl -pi -e 's!^GCC_LANGUAGES=.*!GCC_LANGUAGES="c,c++,objc"!' toolchain/crosstool/nslu2-cross335.sh
 
perl -pi -e 's!^GCC_LANGUAGES=.*!GCC_LANGUAGES="c,c++,objc"!' sources/crosstool-native/nslu2-native335.sh
 
 
 
** Compile cross-compiler for arm cpu using gcc compiler on debian 3.1 linux.
 
 
 
<pre>
 
tjyang@debian:~/unslung$ pwd
 
/home/tjyang/unslung
 
tjyang@debian:~/unslung$ rm toolchain/crosstool/.configured
 
tjyang@debian:~/unslung$ rm toolchain/crosstool/.built
 
tjyang@debian:~/unslung$ unset LD_LIBRARY_PATH
 
tjyang@debian:~/unslung$make toolchain
 
</pre>
 
 
 
* A arm gcc with objective-C enabled.
 
<pre>
 
/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/bin/armv5b-softfloat-linux-gcc -v
 
 
 
Reading specs from /export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/lib/gcc-lib/armv5b-softfloat-linux/3.3.5/specs
 
Configured with: /export/home/tjyang/slug/unslung/toolchain/crosstool/build/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/gcc-3.3.5/configure --target=armv5b-softfloat-linux --host=i686-host_pc-linux-gnu --prefix=/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5 --with-float=soft --with-cpu=xscale --enable-cxx-flags=-mcpu=xscale --with-headers=/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/armv5b-softfloat-linux/include --with-local-prefix=/export/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/armv5b-softfloat-linux --disable-nls --enable-threads=posix --enable-symvers=gnu --enable-__cxa_atexit --enable-languages=c,c++,objc --enable-shared --enable-c99 --enable-long-long
 
Thread model: posix
 
gcc version 3.3.5
 
[tjyang@dual unslung]$
 
  </pre>
 
** A simple test of objc on host linux machine.
 
<pre>
 
[tjyang@dual bin]$ pwd
 
/home/tjyang/slug/unslung/toolchain/armv5b-softfloat-linux/gcc-3.3.5-glibc-2.2.5/armv5b-softfloat-linux/bin
 
[tjyang@dual bin]$
 
[tjyang@dual bin]$ cat helloworld.m
 
#include <stdio.h>
 
 
 
int main(void)
 
{
 
  printf("Hello World\n");
 
}
 
[tjyang@dual bin]$ ./gcc helloworld.m -lobjc -o helloworld
 
[tjyang@dual bin]$ file helloworld
 
hellow: ELF 32-bit MSB executable, ARM, version 1 (ARM), for GNU/Linux 2.4.3, dynamically linked (uses shared libs), not stripped
 
[tjyang@dual bin]$ uname -a
 
Linux dual 2.4.21-9.ELsmp #1 SMP Thu Jan 8 17:08:56 EST 2004 i686 i686 i386 GNU/Linux
 
[tjyang@dual bin]$
 
 
 
</pre>
 
** Second step is to use this cross-compiler which generate binaries code for armb cpu to compile a native compiler. This complier can only be run on native machine nslu2 not on Intel linux.
 
<pre>
 
[tjyang@dual unslung]$ make crosstool-native;make crosstool-native-ipk
 
[tjyang@dual unslung]$ ls -lrt builds/*.ipk
 
-rw-rw-r--    1 tjyang  tjyang    5569523 Feb 17 13:32 builds/crosstool-native-bin_0.28-rc37-3_armeb.ipk
 
-rw-rw-r--    1 tjyang  tjyang  12677163 Feb 17 13:33 builds/crosstool-native-lib_0.28-rc37-3_armeb.ipk
 
-rw-rw-r--    1 tjyang  tjyang    1722660 Feb 17 13:33 builds/crosstool-native-inc_0.28-rc37-3_armeb.ipk
 
-rw-rw-r--    1 tjyang  tjyang    7049858 Feb 17 13:34 builds/crosstool-native-arch-bin_0.28-rc37-3_armeb.ipk
 
-rw-rw-r--    1 tjyang  tjyang    9032668 Feb 17 13:34 builds/crosstool-native-arch-lib_0.28-rc37-3_armeb.ipk
 
-rw-rw-r--    1 tjyang  tjyang    7483945 Feb 17 13:35 builds/crosstool-native-arch-inc_0.28-rc37-3_armeb.ipk
 
-rw-rw-r--    1 tjyang  tjyang      1058 Feb 17 13:35 builds/crosstool-native_0.28-rc37-3_armeb.ipk
 
 
 
[tjyang@dual unslung]$ cp  /export/home/tjyang/slug/unslung/builds/*.ipk  /disk76/nslu2/tmp/
 
[tjyang@dual unslung]$
 
 
 
login into your nslu2, cd to where the ipk packages are.
 
run following commands.
 
bash-2.05b# for i in *.ipk
 
> do
 
> ipkg -force-overwrite install $i
 
> done
 
Upgrading crosstool-native-arch-bin on root from 0.28-rc37-3 to 0.28-rc37-5...
 
Configuring crosstool-native-arch-bin
 
Upgrading crosstool-native-arch-inc on root from 0.28-rc37-3 to 0.28-rc37-5...
 
Configuring crosstool-native-arch-inc
 
Upgrading crosstool-native-arch-lib on root from 0.28-rc37-3 to 0.28-rc37-5...
 
Configuring crosstool-native-arch-lib
 
Upgrading crosstool-native-bin on root from 0.28-rc37-3 to 0.28-rc37-5...
 
Configuring crosstool-native-bin
 
Upgrading crosstool-native-inc on root from 0.28-rc37-3 to 0.28-rc37-5...
 
Configuring crosstool-native-inc
 
Upgrading crosstool-native-lib on root from 0.28-rc37-3 to 0.28-rc37-5...
 
Configuring crosstool-native-lib
 
Upgrading crosstool-native on root from 0.28-rc37-3 to 0.28-rc37-5...
 
Configuring crosstool-native
 
bash-2.05b# date
 
Sat Feb 19 01:04:07 CST 2005
 
bash-2.05b#
 
 
 
 
 
</pre>
 
** try to compile helloworld.m objective-C file and run the helloworld binary on nslu2.
 
<pre>
 
 
 
bash-2.05b# gcc helloworld.m -lobjc -o helloworld
 
bash-2.05b# file helloworld
 
helloworld: ELF 32-bit MSB executable, ARM, version 1 (ARM), for GNU/Linux 2.4.3, dynamically linked (uses shared libs), not stripped
 
bash-2.05b# ./helloworld
 
./helloworld: error while loading shared libraries: libobjc.so.1: cannot open shared object file: No such file or directory
 
bash-2.05b#
 
 
 
libobjc.so.1 is in /opt/armeb/armv5b-softfloat-linux/lib, this path need to be in LD_LIBRARY_PATH.
 
 
 
 
 
bash-2.05b# ./helloworld
 
Hello World
 
bash-2.05b# uname -a
 
Linux LKG7BFA96 2.4.22-xfs #1 Sat Jan 1 21:34:54 HST 2005 armv5b unknown unknown GNU/Linux
 
bash-2.05b# date
 
Thu Feb 17 11:35:19 CST 2005
 
bash-2.05b# cat compile.sh
 
/opt/armeb/armv5b-softfloat-linux/bin/gcc  helloworld.m -o helloworld -lobjc
 
bash-2.05b# cat /etc/profile
 
PATH=/opt/bin:/share/hdd/data/public/nslu2/tjyang/unslung/staging/bin:${PATH}
 
TERM=xterm
 
export LD_LIBRARY_PATH=/opt/lib:/lib:/opt/armeb/armv5b-softfloat-linux/lib
 
export PATH TERM
 
bash-2.05b#
 
 
 
</pre>
 
 
 
** Of course more strong testing is needed. please add instructon below if you know how to run objective-c's testsuite in crosstool.
 
 
 
* Using Objective-C enalbed gcc to compile gnustep-core,gnustep-* software.
 
 
 
References: http://lists.gnu.org/archive/html/discuss-gnustep/2005-02/msg00124.html
 

Latest revision as of 18:27, 22 October 2009

This article or section is a stub (i.e., in need of additional material).
You can help us by expanding it


Following are procedures for installing GNUstep on different Operating Systems.


BSD-based systems

To keep this list as brief as possible, information about these systems can be found here.


HP/UX


Linux-based systems

To keep this list as brief as possible, information about these systems can be found here.


Solaris

Take a look at the required and recommended dependencies. Most of these can be found at BlastWave (which I personally recommend) or Sun Freeware. The notable exception are ffcall/libffi, Bonjour and portaudio (as of 2008-05-23).

If you plan on compiling those from source, make sure to enable the creation of SHARED libraries. Bonjour and ffcall compile right out of the box. For portaudio to compile, you will need to grab a daily-snapshot and you need to install Open Sound System headers.

Then, if you follow the installation instructions for GNUstep, you should not run into any problems.

Intel

Intentionally left blank.

Sparc

GNUstep Solaris 10 U2 vmware appliance

  • Download sol u2 image, you need to have a Sun site account.
  • You can run this image in VMware server or VMware player 1.0.3.
  • Install Sun Studio 11 with latest patches.
  • Objective Compiler
    • compile your own
    • get it from BlastWave using pkg-get.
  • download all the GNUstep tar balls and follow build instruction.


OpenSolaris

This will be an add-on packages to OpenSolaris distributions using TWW tools to create SPARC/Intel packages in SVR4 formats. "pkg-inst gnustep-user-1.0 gnustep-developer-1.0 gnustep-apps-1.0" will install GNUstep user,developer and GNUstep native applications. pkg-rm will perform the reverse of installation.

It will have a nice name like GNUstep O.S. (OpenSolaris).


Darwin

Two issues differentiate Darwin from its FreeBSD cousin.

  1. Darwin uses the Apple Objective-C runtime, not the GNU version
  2. Darwin uses the Apple version of GCC, not the GNU version

See Platform:BSD#Darwin.

Windows

There are many Unix Environment solutions for windows. Currently GNUstep is using MingW as its UNIX environment foundation for Windows.

MingW

See Installation on Windows for details on MingW setup. Also look at precompiled binary installer, available from GNUstep's ftp site.


Others

To keep this list as brief as possible, information about these systems can be found here.